HOW TO annuler le service reminder warning

Pour les véhicules Mitsubishi
Répondre
Avatar du membre
Froggy
Administrateur du site
Administrateur du site
Messages : 24686
Enregistré le : 03 sept. 2009 14:27
PS3 ID : FroggySGN
Canton : Valais
Véhicules : Civic Type R FK2 GT
NSX NA1 Fun
Localisation : VS / CH
Contact :

HOW TO annuler le service reminder warning

Message par Froggy » 22 oct. 2012 09:02

Si vous faites meme vos services:
HOW TO CANCEL THE SERVICE REMINDER WARNING

CAUTION
• Be careful not to execute the service reminder warning cancellation by operating the switch again after erasing the service reminder warning indicator which is currently output, because the next warning period will be cancelled.
• If the next warning period is cancelled by mistake, the cancelled warning period can be restored by setting a schedule different from the current one once, and then returning it to the previous schedule.

1. Turn the ignition switch to the "OFF" position.
2. By operating the multi information meter switch, the warning period is displayed on the multi information display.
3. Press the multi information meter switch once for 1.2 seconds or longer.
4. The service reminder indicator flashes.
5. While the service reminder indicator flashes, press the multi information meter switch once for less than 1.2 seconds.
6. The service reminder indicator is turned ON, and "CLEAR" is displayed on the multi information display for 3 seconds.
7. After "CLEAR" is displayed for 3 seconds, the warning period to the next time is displayed.

HOW TO SET THE SCHEDULE

1. Turn the ignition switch to the "OFF" position.
2. By operating the multi information meter switch, the warning period is displayed on the multi information display.
3. Press the multi information meter switch once for 1.2 seconds or longer.
4. The service reminder indicator flashes.
5. While the service reminder indicator flashes, press the multi information meter switch for 1.2 seconds or longer and 3 times consecutively.
6. The service reminder indicator is turned ON, and the current schedule is displayed on the multi information display.
7. While the current schedule is displayed, press the multi information meter switch for less than 1.2 seconds and 3 times consecutively.
8. The multi information display is shifted to the schedule selection mode.
9. When the multi information meter switch is pressed for less than 1.2 seconds, the schedule is shifted, and when the multi information meter switch is pressed for 1.2 seconds or longer, the displayed schedule is set.

NOTE: For schedule, "JPN", "GCC", "EU" and "AUS" can also be selected. However, the setting shall be for "NAS" only.

10.The schedule set in Step 9 is displayed for 3 seconds, and the warning period to the next time is displayed.
http://forums.evolutionm.net/8522580-post6.html


SkY-HawK a écrit:
Les tractions, c'est comme les homosexuels; on peut prendre du plaisir avec, mais c'est pas fait pour!!! :rofl:

Répondre

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 1 invité